Borniak App BORCOOK - Your smoker, under control

Welcome to the BORCOOK manual

This guide walks you step by step through the Borniak Wi-Fi smoker setup, manual control, program creation, and the use of ready-made recipes. Each section includes screenshots, short explanations, and practical tips.

If you’re just getting started, go through the Quick Start first, then open the chapters on the Smoker Panel and Manual Control.

Quick start (3 steps)

1. Connect the app to your smoker — go to Pairing the app with the smoker.
   1. Press the button located at the back of the control panel.
   2. The blue light will start blinking, indicating it is searching for a Wi-Fi network.
      If the panel is already connected to your network, the light will be steady, which means it is connected.
   3. Launch the app on your smartphone. Go to the "Smoker" tab.
   4. Add a device to pair your smoker with the app.
   5. Select the device you want to pair.
      Android: Your smoker should appear on the list – select and confirm.
      iOS: The system does not allow you to display the network; you must use the card attached to the panel or scan the QR code at the bottom of the control panel.
   6. You need the code from the smoker's display.
      To display it: press the knob for 5 seconds – the panel will show a digital code. Enter it in the app.
   7. During pairing, the app will ask for Wi-Fi details.
      Enter the network name and password. Make sure your network has Internet access – this enables synchronisation.
   8. Select the device model from the list.
   9. Done – you can now control your smoker.
2. Update the firmware — if you see the update icon on the panel, perform the update before first use.
3. Enable manual mode or choose a recipe — see Manual control or Ready-made recipes.